Garmin G3X Touch
™
Pilot’s Guide for Certified Aircraft
190-02472-00 Rev. D
Appendix B
372
System
Overview
Flight
InstrumentsEIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
FeaturesAFCSAnnun/AlertsAppendixIndex
PROXIMITY WAYPOINTS AND ALARMS
The Proximity Waypoints Page allows the pilot to define an alarm circle around a
waypoint location. The Proximity Alarm will alert the pilot when the aircraft enters
the boundary of the defined radius, however does not alert the pilot when leaving the
radius.
Proximity Waypoint Alarms must be 'On' for alerting to occur, otherwise the Proximity
Waypoint is simply a red circle on the navigation map.
Creating proximity waypoints:
1)
Press the MENU Key twice to open the Main Menu.
2)
Touch the User Waypoints Button. The User Waypoints Page is displayed.
3)
Touch the Proximity Tab. The Proximity Waypoints List is displayed.
4)
Press the MENU Key. The Proximity Waypoint Menu is displayed.
5)
Touch the New Proximity Waypoint Button.
6)
Touch the Use Map Button or the Use Identifier Button.
7)
If using an identifier, select the desired waypoint using the Waypoint
Identifier Window. Touch the Enter Key to create the proximity waypoint.
Touch the Cancel Key to exit without creating a proximity waypoint.
To Next Page
Loading...
Need help?
General
