Garmin G3X Touch - G3 X Touch System

Garmin G3X Touch
™
Pilot’s Guide for Certified Aircraft
190-02472-00 Rev. D
8
System Overview
System
Overview
Flight
InstrumentsEIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazard
Avoidance
Additional
FeaturesAFCSAnnun/AlertsAppendixIndex
• GDL
®
5XR
– GDL 50R: ADS-B receiver
– GDL 51R: SXM receiver
– GDL 52R: ADS-B/SXM combination receiver
GDL 50R
G3X TOUCH SYSTEM
The G3X Touch System can be configured as follows:
• Standalone MFD with optional EIS. NOTE: Remote annunciator 'Engine'
lights are required when a standalone MFD with EIS is installed outside of
the pilot's primary field of view.
• One GDU 470 (7" portrait) display unit (provides both PFD and MFD)
• One GDU 460 (10" landscape) display unit (provides both PFD and MFD)
• Two GDU 470 (7" portrait) display units (one configured as PFD and one as
MFD)
• One GDU 460 (10" landscape) display unit and one GDU 470 (7" portrait)
display unit
• Additional GDU's may be installed for the copilot on the right side of the
panel in a side-by-side cockpit or the second cockpit of a tandem aircraft.
Copilot GDU's can display a backup PFD using the same ADAHRS data as the
pilot's PFD.