GE Healthcare Senographe DS
Revision 1 Service Information and Procedures Class A 2385072-16-8EN
Job Card ELE A044 - Install User Publications
Page no. 755 Chapter 7
JC-ELE-A-044.fm
Job Card ELE A044 - Install User Publications Chapter 7
1SUPPLIES
User Publications CD-ROM(s)
2TOOLS
None
3 REQUIRED EFFORT
Personnel: 1 Field Engineer
Time: 10 minutes
4 SAFETY PRECAUTIONS
No specific safety precautions are applicable.
5 PREREQUISITES
None
6STEERING GUIDE
The number of User Publications CD-ROMs that are delivered with the system depend on the options
ordered with the Senographe system. There is always a Core User Publications CD-ROM, and there
may be one or more Options User Publications CD-ROMs.
1. Firstly, install the Core User Publications using the instructions described in section 7 of this Job
Card.
2. Then if supplied, install the each of the Options User Publications using the instructions described in
section 7 of this Job Card.
3. Once all Core and Options User Publications are installed, restart the Browser (see Restarting the
Browser on page 119).
7 PROCEDURE
Use the following steps to install the User Publications (Core or Options) on the Senographe System.
1. Insert the User Publications CD-ROM into the DVD-ROM of the ADS Computer.
2. From behind the Browser, launch a command window (see Launching a Command Line Window on
page 120).
A command window appears with an ADS prompt.
3. Log in as root as follows:
a. At the ADS prompt enter:
su -
b. When requested to specify the root password, enter:
operator
4. Change to the ~sdc/senovision/scripts directory, by entering:
cd ~sdc/senovision/scripts
To Next Page
Loading...
Need help?
General
