Name: Huawei FusionModule800
Brand: Huawei
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Step 3 (Optional) If you want to use the NTP server for time synchronization, select NTP

server sync. Set NTP primary server IP, NTP backup server IP, Port number, and

Sync interval (min), and click Submit.

----End

5.3.5 Adding a Southbound Device

Procedure

Step 1 Choose System Settings > Device Management > Add Device.

Step 2 After you add a device, date, and time based on the site requirements or click

Auto Discover Device, the details about the device connected to the smart

module are displayed.

Figure 5-13 Adding a device

----End

5.3.6 Creating a Smart Module Plan View

Procedure

Step 1 Choose Home > Plan View, create a micro-module in Micro-Module View and

set the layout and device quantity based on the actual micro-module scenario.

Step 2 Drag the icons of registered devices and devices on the cabinet list to appropriate

positions in the layout to create a micro-module plan view.

----End

5.3.7 Adding a UPS2000G

Prerequisites

One end of the straight-through cable has been connected to the RS485 port on

the UPS2000G, and the other end has been connected to the COM4 port on the

ECC800-Pro.

FusionModule800 Smart Small Data Center

User Manual 5 Power-On Commissioning

Huawei FusionModule800 User Manual

Other manuals for Huawei FusionModule800