Malfunctions in driving mode
7.5 Wheels and tyres
Operating manual GMK 6400 3 112 993 en 7 - 13
12.07.2013
7.5 Wheels and tyres
This section contains all the information about changing a wheel and about
using the tyre inflator connection.
7.5.1 Wheel change
• If a puncture occurs while driving, stop the truck crane, taking the follow-
ing traffic into account, and secure the truck crane as outlined in the appli-
cable legal stipulations of the country in which you are working.
• Select an even place, if possible, to change the wheels.
• Engage the parking brake.
s
G
Risk of accident by falling wheel
If you briefly lean a wheel against the truck crane while changing it, secure
it with a rope to prevent it from falling over.
Only move the outriggers when no wheel is leaning against the truck crane.
To Next Page
Loading...
Need help?
General
