Starting/turning off the engine – for crane operation
10.3 Turning off the engine
10 - 18 3 112 993 en Operating manual GMK 6400
12.07.2013
10.3.2 In emergencies, with the emergency stop switches
Four emergency stop switches are provided
for an emergency:
• Press an emergency stop switch (1), (2) or
(3). The switch engages.
The engine shuts down.
H
If an air intake inhibitor is present, this is then triggered.
Resetting the
emergency stop
switch
You can only restart the engine after you have reset the emergency stop
switch.
• Turn off the ignition.
• Turn the used emergency-stop switch until it disengages again.
If an air intake inhibitor is present, this must be loosened;
à Releasing the air intake inhibitor, p. 4 - 27.
G
Risk of overloading if used improperly
Use the emergency stop switches only in an emergency, i.e. if the crane
functions no longer respond to the control levers.
Stopping crane movements suddenly may cause the truck crane to become
overloaded under unfavourable conditions.
1 On the carrier
2 On the hand-held control
3 In the crane cab
To Next Page
Loading...
Need help?
General
