Rigging work
12.2 Choosing a suitable site
12 - 14 3 112 993 en Operating manual GMK 6400
12.07.2013
12.2.4 Safe distance from electrical cables
Always observe the respective national regulations when working in the
vicinity of electrical lines.
• If there are electric cables in the working range of the truck crane, have
these cables disconnected from the source of power, if possible
If this is not possible, you must at least observe the prescribed safe distance
(A).
Different safe distances are recommended by the respective national regu-
lations:
B
Risk of accident due to electric shock
This truck crane is not insulated.
If the truck crane, its equipment, its load/lifting tackle or the guide ropes
touch an electric cable, this will cause serious injury or even death.
To Next Page
Loading...
Need help?
General
