Driving with rigged truck crane
13.4 While driving
13 - 8 3 112 993 en Operating manual GMK 6400
12.07.2013
13.3.4 Transmission/connections
Transmission
• In order to
– drive forward, switch to DM
– drive backward, switch to RM. An acoustic signal is given with addi-
tional equipment
Selecting the transmission mode;
à p. 5 - 32.
Switching on
separate steering
Separate steering must be switched on while driving the rigged truck crane;
à Switching to separate steering, p. 5 - 66.
13.4 While driving
• Only drive at the lowest possible speed, max. 1.5 km/h (1 mph).
• The turning radius should be as great as possible when driving around
corners.
• Only steer the truck crane when it is rolling and avoid sudden steering
changes.
S
Risk of damage to the steering linkage
The steering linkage can be damaged if the steering wheel is moved while
the vehicle is stationary.
S
Risk of damage to the axle lines
The suspension struts could be damaged if the maximum permissible oper-
ation pressure in the suspension is exceeded.
Always monitor the operation pressure in the suspension when moving the
rigged truck crane.
To Next Page
Loading...
Need help?
General
