Malfunctions in driving mode
7.7 Troubleshooting
Operating manual GMK 6400 3 112 993 en 7 - 35
12.07.2013
7.7.11 Malfunctions on the ECOS carrier
This section contains general malfunctions, and malfunctions which gener-
ate an error display. It also contains information on reading error messages
on the
Outrigger control units.
ECOS program
version
Always note the number of the programme version before referring to
Manitowoc Crane Care for malfunctions.
• If required, open the main menu ö.
The display (1) shows the number of the current programme version.
General
malfunctions
The following table contains information on troubleshooting and possible
solutions.
H
If further malfunctions occur, the appropriate error messages are shown in
the
ECOS display.
s
Malfunction Cause Remedy
Ignition on –
ECOS display
does activate
Fuses F1/5, F4/6 blown Replace the blown fuse;
à p. 7 - 20
To Next Page
Loading...
Need help?
General
