3-209
3 Functions of NB-Designer
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
3-7 Function Parts
3
3-7-4 Timer
Timer is a kind of component performing the timing. When the timing is over, it will play the
other corresponding functions such as periodical Macro instruction execution, parameter setting and
data transmission etc.
Process of adding the Timer
1
First press the Timer icon before dragging it into the screen, and go to [Timer] tab after the
[Timer Property] dialog box pops up.
3-7-4 Timer
Descriptions of Timer Properties
Trigger
Mode
Always With this triggering mode, the timer will be triggered once it is
initialized. The timer will be operated when displaying the screen in
the timer was loaded to, and the timer will be stopped automatically
and will not be triggered any more when the number of the timer
trigger operations reaches to the value specified at “Repeat Count
”.
When screen is
loading
The timer will be operated when the timer is placed in the screen and
the number of the timer trigger operations it will stop automatically
after the value set in “Repeat Count” being reached, and will not be
triggered any more. The effect of this function is almost the same as
that of “All time”.
When screen is
unloading
Function operation will be triggered once when the screen where the
timer component locates is closed.
To Next Page
Loading...
Need help?
General
