3 Functions of NB-Designer
3-48
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
The methods to change the screen property:
• Double-click the area in which no components are arranged in the screen.
• Do not click the components in the screen and click the icons of tool bar.
Title
Assign the unique name for each screen for convenient differentiation. Of course, the screen title
can be changed.
Screen No.
The valid screen No. ranges from 0 to 32767. Screen No. is assigned by the system when the new
screen is created, and it can’t be changed by the user. Due to the deletion or addition of the screen,
so the screen No. can be inconsecutive.
Position
When the screen is the screen ejected by using “Pop-up Screen” function of the function key, the
vertex in the upper-left of the screen will be displayed in this position.
Width and Height
Width and height can be set for the Pop-up Screen, and if it is the Base Screen, it must be set to the
default size (i.e. the size of the full screen).
Screen Attribute
Keyboard page determines whether to set the screen as Keyboard Screen. Print page can be used
to set the size of this screen regardless of the limitation of the actual resolution of the PT. The NB
Series does not support [Print page].
Protect key mapping on common sheet screen
The NB Series does not support this function.
Switching to the lowest security level when screen closed
If the security level is set for one screen to realize the function, i.e. the password will be cleared
automatically when the screen is closed, and the password needs to be input again when the screen
is entered again, the security level will become 0 only if the screen is closed.
3-4-2 Screen Property
To Next Page
Loading...
Need help?
General
