6 Descriptions of New Functions Added into NB-TW01B
6-6
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Settings for using Ethernet
In the [NBManager] dialog box, click the [Set] button in the [Communication Setting] option, and then
check the [Ethernet] in Communication Method option in the Communication Setting dialog box with
the various parameters same as that of PT Unit. At the same time, set the IP address of PC to the
same network segment as that for PT Unit, as shown below:
Setting and obtaining IP address and Port
In the [NBManager] dialog box, click the [System Operate].
6-1-6 NBManager
Get IP Address/Port of PT Obtain IP address and port number of PT.
Set IP Address/Port of PT Modify the IP address and Port of PT to the parameters which were
set to [IP] and [Port]. (IP Address/Port can be updated only when the
connection is realized via USB port or serial port.)
To Next Page
Loading...
Need help?
General
