8-3
8 Web Interface
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
8-2 Setup Web Interface on a PC
8
8-2 Setup Web Interface on a PC
Perform following settings beforehand in order to use Web Interface function.
Setting User Name and Password for Web Interface function
Set the User Name and Password for using this function. For the details, refer to the 4-8 Web Inter-
face Operation (Page 4-19).
Enable Web Interface function
In order to enable the Web Interface function, embed the function which turns LB9175 ON to the
project. Additionally, the LB9175 setting is applied immediately. Restart is not necessary.
To Next Page
Loading...
Need help?
General
