6
Display Panel
The function items displayed serve as selector keys. You can select or specify an
item by lightly pressing them.
When you select or specify an item on the display panel, it is highlighted like
. Keys appearing as cannot be used.
Note
❒ The following illustration is an example based on a machine with the 1000–
sheet finisher installed.
❖
❖❖
❖ Initial copy display
1.
Original function, Image Density
and Special Original function.
2.
Operational status and messages.
3.
You can register up to three fre-
quently used reduce/enlarge ratios
other than the fixed reduce/enlarge
ratios. See p.95 “Shortcut R/E”.
4.
Numbers of originals scanned
into memory, copies set, and copies
made.
5.
Sort, Stack, Staple functions.
6.
Displays contents of the Shortcut
keys. You can register frequently
used functions in these keys. See
p.94 “Copy Function Key: F1-F5”.
7.
Displays available functions.
Press a function name to display its
menu. For example, press [Reduce/En-
large] to bring up the Reduce/Enlarge
menu.
8.
A clip mark indicates the current-
ly selected function.
ZLFS080E
RuC3_GBcopy-F_FM.book Page 6 Wednesday, June 25, 2003 9:39 AM
To Next Page
Loading...
Need help?
General
