More Transmission Functions
79
4
Dual Access
The machine can scan other messages
into memory even while sending a
fax message from memory, receiving
a message into memory, or automati-
cally printing a report. Since the ma-
chine starts sending the second
message immediately after the cur-
rent transmission ends, the line is
used efficiently.
Note
❒ Note that during Immediate
Transmission or when in User
Tools mode, the machine cannot
scan an original.
Transmission with Image
Rotation
Generally, place A4, 8
1
/
2
"×11" origi-
nals in the landscape orientation (L).
If you place an A4, 8
1
/
2
"×11" original
in the portrait orientation (K), the
image will be sent rotated by 90°. Pro-
viding the receiver has A4, 8
1
/
2
"×11"
landscape paper (L), the message
will be printed the same size as the
original.
Note
❒ This function is unavailable with
Immediate Transmission.
❒ When Image Rotation is used, all
messages are sent by normal Mem-
ory Transmission.
Simultaneous Broadcast
The optional extra G3 interface unit is re-
quired.
The Standard Broadcast function
sends faxes one at a time to multiple
destinations in the order of specified
destinations.
The Simultaneous Broadcast func-
tion, however, can simultaneously
send faxes to three destinations using
different lines.
This results in a shorter overall trans-
mission time.
Note
❒ This function can use a maximum
of three lines simultaneously.
❒ When using the optional extra G3
interface unit, if you set the line se-
lection as “G3 Auto” beforehand,
the machine will use whichever G3
line is not busy. This increases effi-
ciency.
RussianC3Fax-combine-AE_F_FM.book Page 79 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
Need help?
General
