EasyManuals Logo

Ricoh Aficio 2022 User Manual

Ricoh Aficio 2022
1118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #506 background imageLoading...
Page #506 background image
Reception Features
88
5
If the Requesting Party specified a
destination with both the fax
number and e-mail address pro-
grammed in this machine (Trans-
fer Station) as End Receiver, the
machine sends the message to the
fax number or e-mail address ac-
cording to the User Parameter set-
ting. See p.158 User Parameters
(switch 32, bit 0).
-
--
-Multistep transfer
The principles of Transfer Stations
can be used to build up a multi-step
facsimile network where messages
are passed through several Transfer
Stations. By programming the Receiv-
ing Stations in a Transfer Station
Group, you can enable this machine
to transfer messages onto other
Transfer Stations.
For more information, contact your
service representative.
This function can only be used if the
machines are made by the same man-
ufacturer.
-
--
-Sending the Transfer Result
Report
This machine compares the fax
number of the Requesting Party with
the Requesting Party's number pro-
grammed as a Quick Dial or Speed Di-
al. If the lower five digits of the two
numbers match, it sends the Transfer
Result Report to the Requesting Party.
For example:
Requesting Party's own dial number:
001813-11112222
Transfer Station's Quick Dial:
03-11112222
Transfer Result Report
Preparation
Program the Requesting Party fax
number into a Quick Dial key in
the Transfer Station (this machine)
in advance.
Program your own fax number.
See p.182 Transfer Report.
Program the Polling ID. See p.183
Programming a Polling ID.
This reports whether transmission to
the Receiving Stations was successful
or not.
When the Transfer Station has trans-
ferred the message to all Receiving
Stations, it sends the Transfer Result
Report back to the Requesting Party.
The machine prints the report if it
cannot be sent back to the Requesting
Party.
Note
You can set whether a portion of
the original image is printed on the
report with the User Parameters.
See p.158 User Parameters
(switch 04, bit 7).
Unprogrammed destination col-
umn indicates the message could
not be sent because either the end
receiver's fax number or e-mail ad-
dress is incorrect, or not pro-
grammed.
-- column indicates the Internet
Fax document was sent to the mail
server programmed in this ma-
chine.
RussianC3Fax-combine-AE_F_FM.book Page 88 Monday, July 14, 2003 2:36 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio 2022 and is the answer not in the manual?

Ricoh Aficio 2022 Specifications

General IconGeneral
BrandRicoh
ModelAficio 2022
CategoryAll in One Printer
LanguageEnglish

Related product manuals