Settings You Can Change with User Tools
95
4
Reproduction Ratio
1
/
2
❖
❖❖
❖ Shortcut R/E
You can register up to three fre-
quently used Reduce/Enlarge ratios
other than the fixed Reduce/En-
large ratio and have them shown on
the initial display. You can also
change registered Reduce/Enlarge
ratios.
If no Reduce/Enlarge ratio has
been set when selecting [Shortcut
R/E 1], [Shortcut R/E 2], or [Shortcut
R/E 3], enter the ratio using the
number keys.
❖
❖❖
❖ Enlarge 1-5
You can customize available en-
largement ratios by pressing [Re-
duce/Enlarge], followed by [Enlarge].
Note
❒ Default:
• Metric version:
• Enlarge 1: 115%
• Enlarge 2: 122%
• Enlarge 3: 141%
• Enlarge 4: 200%
• Enlarge 5: 400%
• Inch version:
• Enlarge 1: 121%
• Enlarge 2: 129%
• Enlarge 3: 155%
• Enlarge 4: 200%
• Enlarge 5: 400%
❒ When selecting [
User Enlrg. Ra-
tio
], enter a ratio using the
number keys (in the range of
101 to 400%).
❖
❖❖
❖ Priority Setting: Enlarge
You can set the ratio with priority
when [
Reduce/Enlarge
] is pressed,
followed by [Enlarge].
Note
❒ Default:
• Metric version: 141%
• Inch version: 155%
Reproduction Ratio
2
/
2
❖
❖❖
❖ Reduce 1-6
You can customize available re-
duction ratios by pressing [Re-
duce/Enlarge], followed by [Reduce].
Note
❒ Default:
• Metric version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%
• Reduce 4: 71%
• Reduce 5: 75%
• Reduce 6: 82%
• Inch version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%
• Reduce 4: 73%
• Reduce 5: 78%
• Reduce 6: 85%
❒ When selecting [
User Redc.Ra-
tio
], enter a ratio using the
number keys (in the range of 25
to 99%).
Enlarge1 Enlarge2 Enlarge3 Enlarge4 Enlarge5
Reduce1 Reduce2 Reduce3 Reduce4 Reduce5 Reduce6
RuC3_GBcopy-F_FM.book Page 95 Wednesday, June 25, 2003 9:39 AM
To Next Page
Loading...
Need help?
General
