Settings You Can Change with User Tools
93
4
General Features
2
/
4
❖
❖❖
❖ Duplex Mode Priority
You can select the type of the Du-
plex function effective when the
power is turned on, or modes
cleared.
Note
❒ Default:
• Metric version: 1 Sided
→
1
Sided
• Inch version: 1 Sided
→
2 Sided
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes cleared.
Note
❒ Default: Standard
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 99.
Note
❒ Default: 99 Sheets.
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
Note
❒ Default: ON
❒ If Panel Tone in User Tools (Sys-
tem Settings) is [OFF], the beep-
er does not sound, whatever the
Tone: Original remains setting.
See "Panel Tone" in “General
Features”, General Settings
Guide.
❖
❖❖
❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: ON
❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [ON],
the machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper jam
occurred.
RuC3_GBcopy-F_FM.book Page 93 Wednesday, June 25, 2003 9:39 AM
To Next Page
Loading...
Need help?
General
