Placing Originals
13
1
Placing Originals in the Auto
Document Feeder
Settings should be made in the fol-
lowing situations:
❖
❖❖
❖ When placing originals consisting of
more than 50 pages:
p.13 “Batch”
❖
❖❖
❖ When placing originals one by one:
p.14 “SADF”
❖
❖❖
❖ When placing same width originals of
different sizes:
p.15 “Mixed size”
❖
❖❖
❖ When placing custom size originals:
p.15 “Placing custom size origi-
nals”
Note
❒ Do not stack originals above the
limit mark on the side guide of the
ADF.
❒ The last page should be on the bot-
tom.
❒ Do not place objects on the sensors
or cover them with your hands.
Doing so could cause the size to be
detected incorrectly.
1.
Sensors
A
AA
A
Set the document guide to the
original size.
B
BB
B
Place the aligned originals face
up into the ADF.
1.
Limit mark
2.
Document guide
Note
❒ Straighten any curls in the orig-
inals before placing them in the
ADF.
❒ To prevent multi-sheet feeds,
fan the originals before placing
them in the ADF.
❒ Place the originals squarely.
Batch
When using Batch, the machine cop-
ies originals of more than 50 pages as
a single document, even if placed in
the ADF in parts.
Important
❒ Place special originals, such as
translucent paper, one by one.
A
AA
A
Press [Special Original].
ZLFH050E
RuC3_GBcopy-F_FM.book Page 13 Wednesday, June 25, 2003 9:39 AM
To Next Page
Loading...
Need help?
General
