To Next Page

To Previous Page

Confirming the Connection

Using the IEEE 802.11b

(Wireless LAN)

Make sure the LED of the IEEE

802.11b card is lit.

❖

❖❖

❖ When using in infrastructure mode

1. If [LAN Type] on the [Interface Set-

tings]/[Network] screen is not set to

[IEEE 802.11b], it does not light, even

if the main power is on.

2. If it is connected properly to the

network, the LED is green when in

infrastructure mode. If the LED is

blinking, the machine is searching

for devices.

❖

❖❖

❖ When using in ad hoc mode/802.11

ad hoc mode

1. If the IEEE 802.11b card is work-

ing, it is lit in orange.

2. If it is connected properly to the

network, the LED is green when in

ad hoc mode or 802.11 ad hoc mode.

If the LED is blinking, the machine

is searching for devices. The LED

will light after a few seconds.

Print the configuration page to

verify settings.

Reference

For more information about

printing a configuration page,

see Printer Reference 2.

ZGDH600J

Ricoh Aficio 2022 User Manual

Questions and Answers: