Placing Originals
13
2
Placing Originals
You can place the originals either in
the optional ADF or on the exposure
glass. Some types of originals are un-
suitable for the ADF, so they must be
placed on the exposure glass.
Which way you place the original de-
pends on its size and whether you are
using the ADF or the exposure glass.
See p.19 “Original sizes difficult to
detect”.
❖
❖❖
❖ How to place A4, B4 JIS (Japanese
Industrial Standard), A3, 8
1
/
2
"×
××
×11",
8
1
/
2
"×
××
×14", and 11"×
××
×17" size originals
Note
❒ When you place originals as
shown in the above illustration,
the fax header will be printed on
received faxes at the destination as
follows:
• *1 On the top of the fax
• *2 On the left side of the fax
❖
❖❖
❖ How to place A5 and B5 JIS size
originals
Limitation
❒ If you place A5 size documents on
the exposure glass, they will not be
detected. A5 size documents
placed in the ADF are sent. See
p.19 “Original sizes difficult to de-
tect”.
Note
❒ When you place originals as
shown in the above illustration,
the fax header will be printed on
the received faxes at the destina-
tion as follows:
• *1 On the top of the fax
• *2 On the left side of the fax
❒ When sending a fax, the image
output at the other end depends on
the size and orientation of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and orientation as
that of the original, the fax image
may be reduced in size, trimmed at
both edges, or divided into two or
more sheets. When sending an im-
portant original, we recommend
you ask the receiver about the size
and orientation of the paper used
in their terminal.
Original
Where to place originals
Exposure glass
The ADF
ZLBH030E
Original
Where to place originals
Exposure glass
The ADF
ZLBH020E
RussianC3Fax-combine-AE_F_FM.book Page 13 Monday, July 14, 2003 2:30 PM
To Next Page
Loading...
Need help?
General
