4.7 Currently set language in the HMI
The table below lists all of the languages available at the user interface.
The currently set language can be queried in the part program and in the synchronized actions
using the following system variable:
$AN_LANGUAGE_ON_HMI = <value>
<value> Language Language code
1 German (Germany) GER
2 French FRA
3 English (Great Britain) ENG
4 Spanish ESP
6 Italian ITA
7 Dutch NLD
8 Simplified Chinese CHS
9 Swedish SVE
18 Hungarian HUN
19 Finnish FIN
28 Czech CSY
50 Portuguese (Brazil) PTB
53 Polish PLK
55 Danish DAN
57 Russian RUS
68 Slovakian SKY
72 Rumanian ROM
80 Traditional Chinese CHT
85 Korean KOR
87 Japanese JPN
89 Turkish TRK
Note
$AN_LANGUAGE_ON_HMI is updated:
● after the system boots.
● after NC and/or PLC reset.
● after switching over to another NC within the scope of M2N.
● after changing over the language on the HMI.
Tables
4.7 Currently set language in the HMI
NC programming
Programming Manual, 12/2019, 6FC5398-2EP40-0BA0 1303
To Next Page
Loading...
Need help?
General
