Note
Compatibility of units
When using variables (assignment, comparison, calculation, etc.) the compatibility of the units
involved is not checked. Should conversion be required, this is the sole responsibility of the
user / machine manufacturer.
See also
Variables (Page 389)
3.1.1.10 Attribute: Access rights (APR, APW, APRP, APWP, APRB, APWB)
Designation
The designation of the access attribute AP... comprises:
1. A: Access
2. P: Protection
3. R / W: Read / Write
4. P / O: Program / BTSS (OPI)
Access rights / access levels
The following access levels, which have to be specified during programming, correspond to the
access rights:
Access right Protection level
System password 0
Machine manufacturer password 1
Service password 2
End user password 3
Key-operated switch position 3 4
Key-operated switch position 2 5
Key-operated switch position 1 6
Key-operated switch position 0 7
Definition (DEF) of user data
Access rights (APR.../APW...) can be defined for the following data:
● Global user data (GUD)
Work preparation
3.1 Flexible NC programming
NC programming
412 Programming Manual, 12/2019, 6FC5398-2EP40-0BA0
To Next Page
Loading...
Need help?
General
