Xerox 8830 Service Manual

Using the Diagnostic Software
After the diagnostic software is started, the Welcome screen is displayed
If the diagnostic software can not communicate with the scanner, the
Communication Error screen is displayed (Figure 6-5). If the Scanner
has not yet warmed up completely or there is a connection fault, the
Communications Error screen may be displayed.
The Retry button attempts to establish communications with the
Scanner. The Exit button terminates the program.
if the scanner is still initializing, a screen may be displayed If the
diagnostic software can communicate satisfactorily with the Scanner, the
Password Entry screen is displayed (Figure 6-6).
Figure 6-5. Communication Error Screen
Figure 6-6. Password Entry Screen
7356 Scanner
4/97
6-7
Diagnostics
Enter ES8150 In the Password box provided, and press the Enter key. If
the password is valid, the Begin button becomes selectable. Select the
Begin button to gain access to the program.

Xerox 8830 Specifications

General

Brand	Xerox
Model	8830
Category	Printer
Language	English