3-27
CHECKING THE ENGINE OIL LEVEL/
CHANGING THE ENGINE OIL
CHK
ADJ
NOTE:
NOTE:
Before checking the engine oil level, wait a few
minutes until the oil has settled.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS00074
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
S engine oil filler cap
1
S engine oil drain bolt
2
(along with the gasket)
4. Drain:
S engine oil
(completely from the crankcase)
To Next Page
Loading...
Need help?
General
