Yamaha FZ6-SS User Manual

6-16
WATER PUMP
COOL
10 Nm (1.0 mSkg, 7.2 ftSlb)
NOTE:
NOTE:
INSTALLING THE WATER PUMP
1. Install:
S O-ring
New
S copper washer
New
S water pump assembly
Align the projection
a
at the oil pump shaft and
water pump shaft groove
b
.
2. Install:
S water pump outlet hose
1
S radiator outlet hose
2
S Install the radiator outlet hose with white
a
mark positioned outside.
S Install the hose clamp with its screw head
pointed to the inner side.
3. Fill:
S cooling system
(with the specified amount of the recom-
mended coolant)
Refer to “CHANGING THE COOLANT” in
chapter 3.
4. Check:
S cooling system
Leaks ! Repair or replace any faulty part.
5. Measure:
S radiator cap opening pressure
Below the specified pressure !I! Replace the
radiator cap.
Refer to “CHECKING THE RADIATOR”.

Yamaha FZ6-SS Specifications

General

Brand	Yamaha
Model	FZ6-SS
Category	Motorcycle
Language	English