Yamaha TMAX 2020 Service Manual

9-25
CRUISE CONTROL SYSTEM (for XP560D)
EAS32883
[C-1] ERASING THE DTC
1. Delete the DTC using the malfunction of the YDT, and check that the MIL goes off.
EAS32884
[C-2] FINAL CHECK
WARNING
EWA17441
When maintenance or checks have been performed on components related to the cruise control
system, be sure to perform a final check before delivering the vehicle to the customer.
1. Check the front brake lever and rear brake lever operation.
2. Check the rear brake light switches.
Refer to “CHECKING THE SWITCHES” on page 8-91.
3. Execute the diagnostic mode (DTC No. 82 and 83) to check the operation of the front brake light
switch, rear brake light switch, and grip cancel switch.
Refer to “DIAGNOSTIC CODE: SENSOR OPERATION TABLE” on page 9-58.
4. Execute the diagnostic mode (DTC No. 80 and 81) to check the operation of the cruise control set-
ting switch.
Refer to “DIAGNOSTIC CODE: SENSOR OPERATION TABLE” on page 9-58.
5. Delete the DTCs.
Refer to “DTC TABLE” on page 9-38.
6. Check the operation of the cruise control system.
Test ride the vehicle and confirm that the cruise control system is operating normally.

Yamaha TMAX 2020 Specifications

General

Displacement	562cc
Bore x Stroke	70.0 mm x 73.0 mm
Compression Ratio	10.9:1
Fuel System	Fuel Injection
Ignition System	TCI
Transmission	V-Belt Automatic
Rear Suspension	Swingarm
Front Brake	Hydraulic dual disc, Ø267 mm
Rear Brake	Hydraulic single disc, Ø282 mm
Front Tyre	120/70R15M/C 56H
Rear Tyre	160/60R15M/C 67H
Overall Length	2, 200 mm
Overall Width	765 mm
Seat Height	800 mm
Wheelbase	1, 575 mm
Wet Weight	218 kg
Fuel Tank Capacity	15 litres
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valve
Maximum Torque	55.7 Nm @ 5, 250 rpm
Front Suspension	Telescopic fork
Overall Height	1, 420mm