Abbott i-STAT 1 System Manual

5
Art: 730009-00B Rev. Date: 09-Jan-12
CUSTOMIZING REPORTABLE RANGES ON THE i-STAT 1 HANDHELD USING i-STAT/DE
1. Access the Customization Workspace
• RALS-Plus Users:
o RALS-Plus application, pick i-STAT from the drop-down menu.
o Click on Device Customization.
• PrecisionWeb Users::
o Enter the DE i-STAT Customization Workspace.
2. Make sure the “Enable Customization” box has a check mark in it.
Also, make certain that the Enabled box is checked for the particular location to which the
i-STAT 1 handheld is assigned.
3. If the location where this handheld is assigned has a check mark under Uses Default, under the
Default customization profile: column, double click the alphanumeric code under Preferences.
Otherwise, double click the alphanumeric code under the Preferences column for the specific
location to which this handheld is assigned.
4. Once the Preferences window opens, click on the Results tab.

Abbott i-STAT 1 Specifications

General

Brand	Abbott
Model	i-STAT 1
Category	Measuring Instruments
Language	English