Abbott i-STAT 1 System Manual

Art: 714383-00F Rev. Date: 02-Sep-08 21-3
1. Determine the following site specific information for this Downloader:
• IP Address (Example: 10.10.12.142 used below)
• Gateway Address (Example: 10.10.12.1 used below)
• Netmask (Example: 8 for 255.255.255.0 used below)
2. At the Your choice? prompt, Select 0 for Server Configuration and enter
the information required for this Downloader.
3. At each of the prompts enter the bold-faced value.
Note: If the information to be entered is the same as the default
value, press the Enter key.
• IP Address: (000)10.(000) 10.(000)12.(000)142
• Set Gateway IP Address: (N) Y
• Gateway IP addr: (000)10.(000)10.(000)12.(000) 1
• Netmask: Number of Bits for Host Part (00) 8
Note: The Netmask is configured as the number of host bits
required based on the subnet being used.
• Change telnet config password: (N) N
Default Netmasks
for Standard IP
Networks
subnet mask host bits network tyPe
255.0.0.0 24 Class A
255.255.0.0 16 Class B
255.255.255.0 8 Class C
Netmasks for Other
Networks
subnet mask host bits subnet mask host bits
255.255.255.252 2 255.255.192.0 14
255.255.255.248 3 255.255.128.0 15
255.255.255.240 4 255.255.0.0 16
255.255.255.224 5 255.254.0.0 17
255.255.255.192 6 255.252.0.0 18
255.255.255.128 7 255.248.0.0 19
255.255.255.0 8 255.240.0.0 20
255.255.254.0 9 255.224.0.0 21
255.255.252.0 10 255.192.0.0 22
255.255.248.0 11 255.128.0.0 23
255.255.240.0 12 255.0.0.0 24
255.255.224.0 13

Abbott i-STAT 1 Specifications

General

Brand	Abbott
Model	i-STAT 1
Category	Measuring Instruments
Language	English