28.
Setting after Installation
1. Connect the power plug of the host machine to the outlet.
2. Turn ON the main power switch.
3. In the following Service Mode, set the value to "1."
COPIER > FUNCTION > INSTALL > BLE-USE
NOTE:
When [System Manager Information Settings] is set, it is required to log in as a system manager in accordance with instructions
of the user administrator.
4. Select [Settings/Registration] > [Preferences] > [Network] > [Confirm Network Connection Setting Changes], and
set the item [ON].
5. Select [Settings/Registration] > [Preferences] > [Network] > [Bluetooth Settings] > [Use Bluetooth] > [ON].
6. The message "Perform Apply Setting Changes from Settings/Registration" appears in the Touch Panel Display.
7. Perform "Apply Setting Changes."
Press [Settings/Registration] > [Yes].
4. Host Machine Options
204
To Next Page
Loading...
Need help?
General