4. Check the operation such as paper feed and stapling to make sure that problems such as a jam or malfunction do
not occur.
CAUTION:
Staple-free binding unit might be out of its correct position due to a mechanical shock during transportation. When the
staple-free binding unit is out of the correct position, a paper stack is clinched at wrong position in the staple-free binding
mode.
To avoid the above, make copies in the following condition after the installation of the finisher and correct the position of
the staple-free binding unit:
• Staple mode: Stapling at rear corner
• Paper size: LTR or A4
• Number of sheet: 2
• Copy quantity: 1
NOTE:
Mechanical drive of the staple-free binding unit is engaged with the stapler unit.
Making copies in the above condition will have the stapler unit returned to its home position and the staple-free binding unit stops
at the correct position.
Detach this Equipment from the Upstream Connection Machine
1.
6. Paper Output Options
798
To Next Page
Loading...
Need help?
General