Staple Finisher-AC1/ Booklet Finisher-AC1
Checking before Installation
The installation site must satisfy the conditions given below.
Therefore, it is recommended that the installation site be looked over before delivering this equipment to the customer.
CAUTION:
• Install the host machine first and then install this equipment.
• Do not carry this equipment with the host machine is installed for prevention of breakage.
â– Checking the Unpacking Space
Be sure to unpack this equipment according to the illustrations in a wide area where there is enough space around it.
â– Essential Items to Be Performed Before Installation
• Turn OFF the main power of the host machine, and disconnect the power plug from the outlet.
WARNING:
• If performing work without disconnecting the power plug of the host machine, it may cause electrical shock.
• If disconnecting the power plug without turning OFF the main power, it may cause damage of the machine.
• When turning OFF the main power, follow the below procedure.
1. Turn OFF the main power switch of the host machine.
2. The display in the Control Panel and the lamp of the main power are turned off.
6. Paper Output Options
764
To Next Page
Loading...
Need help?
General