3. Select the paper type same as that of the loaded paper, and press [OK] > [OK].
NOTE:
If the corresponding paper type is not displayed on the simple settings screen, press [Detailed Settings] and make a selection on
the detailed settings screen.
If the type of loaded paper is not displayed on the detailed settings screen, you can register it.
NOTE:
If Setup Guide is running, perform the following works after Setup Guide ends.
8. When the size has been changed, register the paper size for the Left and Right Deck in the service mode (Level 1).
Right Deck :
COPIER > OPTION > CST > P-SZ-C1
Left Deck :
COPIER > OPTION > CST > P-SZ-C2
9. Exit service mode.
Cassette Settings
1. Pull out the cassette towards the front.
2. Loosen the 2 Fixation Screws, and adjust the Side Guide Plate and the Trailing Edge Guide Plate to the user-
requested size.
2. Host Machine
84
To Next Page
Loading...
Need help?
General