Checking the Contents
[3]
[5]
[4]
[2]
[6]
[7]
[5]
[2]
[2]
*1
[1]
[11] [12] *3
[9] *2
[10]
[8]
[2]
[1] Relay Connector (for Finisher) 1pc. *1
[2] Screw (Binding; M4x7) 7pcs.
[3] Document Insertion Unit or Document Insertion/Folding Unit 1pc.
[4] Fixing Plate (Rear) 1pc.
[5] Screw (Stepped Screw; M4x5) 2pcs.
[6] Fixing Plate (Front) 1pc.
[7] Ground Plate Unit 1pc.
[8] Rail Extension Plate 1pc.
[9] Power Cord 1pc. (for 120V model), 3pcs. (for 230V model) *2
[10] Document Setting Label 1pc.
[11] Document Prohibition Label 1pc.
[12] Jam Removal Label 1pc. *3
*1: Use the part [1] when connecting this equipment and the Finisher. (Refer to Finisher Installation Procedure.)
*2: The package may contain several power cords intended for use in Europe. Use the correct power cord to match the location/
area of installation. Make sure not to leave unused power cords at the site.
*3: The part [12] is supplied with the Document Insertion/Folding Unit only.
<Others>
Including guides
6. Paper Output Options
613
To Next Page
Loading...
