Checking after Installation
NOTE:
When changing the settings upon user's request, it is required to log in as a system manager in accordance with instructions from
the user administrator.
1. Connect the power plug of the host machine to the power outlet.
2. Turn the main power switch ON.
3. Select [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > [Use Voice
Navigation], and check that the setting is [ON].
4. Select [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > [Voice Guide from
Speakers], and check that the setting is ON.
Operation Check
NOTE:
Perform the following check from the Voice Recognition button on the numeric keypad.
■ When Using
1. Press the Voice Guidance Start button.
2. Once the indication on the screen is framed in red, the "Voice Guidance Kit" becomes enabled.
■ When Stopping to Use
1. Press the Voice Guidance Start button.
4. Host Machine Options
245
To Next Page
Loading...
