Paper Deck Unit-E1
Checking before Installation
Requirements for the installation place are given below. It is recommended to look over the place to be used for installation before
delivering the equipment to the user.
CAUTION:
• Install the host machine first and then install the Paper Deck.
• Do not carry the Paper Deck with the host machine is installed for prevention of breakage.
â– Points to Note on Installation
Exercise following caution for installation.
1. This equipment maximum 33 kg. When holding this equipment at the installation, be sure to perform the work in accordance
with the standard to handle a heavy load in each country. In addition, be sure to keep the machine leveled when lifting it.
2. When moving this equipment after having unpacked it, be careful by placing a plate, etc. on areas with steps to prevent the
casters from hitting those steps. If the casters hit a step, the casters or the base plate may be deformed.
â– Product Name
Safety regulations require the product's name to be registered. In some regions where this product is sold, the following names
may be registered instead.
• F281210
Unpacking Procedure
NOTE:
Paper Deck is secured with packaging tapes and cushioning materials to protect it against vibration and shock during transport.
Keep the removed all packaging tapes and cushioning materials for relocation.
1. Remove the cushioning materials.
5. Paper Feed Options
336
To Next Page
Loading...
Need help?
General