Eaton SmartWire-DT SWD Series User Manual

13 Appendix
13.6 SWD module interoperability requirements
SmartWire-DT module IP20 01/20 MN05006001Z-EN www.eaton.com 259
13.6 SWD module interoperability requirements
13.6.1 SmartWire-DT coordinators
Interoperability between SmartWire-DT modules is guaranteed with the fol-
lowing SmartWire-DT coordinator firmware versions (or higher):
Table 66: SmartWire-DT coordinator firmware versions
SmartWire-DT coordinator
firmware version
EU5C-SWD-
DP
EU5C-SWD-
CAN
EU5C-SWD-
EIP-MODTCP
EU5C-SWD-
PROFINET
M22-SWD-...
1.00 1.00 1.00 1.00
M22-SWD-NOP(C)
1.00 1.00 1.00 1.00
DIL-SWD-32-...
1.00 1.00 1.00 1.00
DS7-34DSX...-D
1.10 1.10 1.00 1.00
DX-NET-.SWD.
1.10 1.10 1.00 1.00
EMS-...-SWD-ADP
1.20 1.20 1.00 1.00
EU5E-SWD-4DX
1.00 1.00 1.00 1.00
EU5E-SWD-8DX
1.00 1.00 1.00 1.00
EU5E-SWD-4D4D, ...-R
1.00 1.00 1.00 1.00
EU5E-SWD-4D2R
1.00 1.00 1.00 1.00
EU5E-SWD-X8D
1.00 1.00 1.00 1.00
EU5E-SWD-4AX
1.20 1.20 1.00 1.00
EU5E-SWD-2A2A
1.20 1.20 1.00 1.00
EU5E-SWD-4PT
1.20 1.20 1.00 1.00
EU5E-SWD-4PT-2
1.20 1.20 1.00 1.00
NZM-XSWD-704
1.10 1.10 1.00 1.00
PKE-SWD-32
1.10 1.10 1.00 1.00
PKE-SWD-CP
1.20 1.20 1.00 1.00
PKE-SWD
1.20 1.20 1.00 1.00
SL4-SWD, SL7-SWD
1.10 1.10 1.00 1.00
SWD4-FFR-PF1-1, SWD4-FFR-ST1-1
1.30 1.30 1.10 –
SWD4-RC8-10
1.00 1.00 1.00 1.00
￫
The firmware of the SmartWire-DT gateway can be updated
using the SWD-Assist program. This program and firmware ver-
sions are available for free at:
http://www.eaton.eu/software

Eaton SmartWire-DT SWD Series Specifications

General

Brand	Eaton
Model	SmartWire-DT SWD Series
Category	Control Unit
Language	English