Used terms and abbreviations
3.3 Used terms and abbreviations
Earth-potential-free common point
Asynchronous sensorless closed loop. Operation with asynchronous
motor model without encoder
Automatic motor identification; Measurement of resistance and in-
ductance
American coding for cable cross-sections
Open source real-time interface for sensors and actuators (DIN
5008)
Complete drive module incl. auxiliary equipment (control cabinet)
KEB start-up and parameterization software
Demineralized water, also known as deionized (DI) water
German Institute for Standardization
CiA DS 402 - CAN unit profile for drives
Electromagnetic compatibility
Bidirectional encoder interface of the company Heidenhain
Real-time Ethernet bus system; EtherCAT® is a registered trade-
mark and patented technology, licensed by Beckhoff Automation
GmbH, Germany. It is marked by the following logo:
Real-time bus system - defines protocols, connectors, cable types
Functional safety via Ethernet
software-generated encoder output
Reference potential, ground
High frequency filter to the mains
Bidirectional encoder interface of the company Sick-Stegmann
Visual user interface (Touchscreen)
Incremental signal with an output voltage (up to 30V) -> TTL
Software function for thermal monitoring of the motor winding
Degree of protection (xx for level)
(Also Node ID) Describes in this document the identification number
with which a KEB device is addressed via the KEB own protocol
DIN66019.
Silicon temperature sensor (polarised)
Air/ water heat exchanger
American measuring unit for large cable cross-sections
To Next Page
Loading...
Need help?
General
