➢ The F6 / S6 drives have a different number of digital outputs depending on
the control type.
Allocated on the terminal blocks X2A and X2B of the control board
Software outputs (connected with the digital inputs IA-IC)
1 relay output (specification => installation manual of the control board)
Control type A (APPLICATION)
2 digital outputs
(specification => installation manual of the control board)
Software outputs (connected with the digital inputs IA-IC)
1 relay output (specification => installation manual of the control board)
When using control type A, the inverter always contains a safety module. This safety
module has its own digital output functions.
The description of these outputs must be taken from the manual for the safety module.
Control type P (Pro)
2 digital outputs
(specification => installation manual of the control board)
Software outputs (connected with the digital inputs IA-IC)
1 Relay output
(Specification => Installation manual of the control board)
In the case of control variants with positive-driven relays, the control de-
pends on the safety module and cannot be influenced via the do param-
eters. (de13 ctrl hardware type -> hw version = 5 or 6 => .. + safety re-
lay)
For a more detailed description of the digital outputs, please refer to the installation man-
ual
To Next Page
Loading...
Need help?
General
