KEB COMBIVERT F6 Programming Manual

Liquid cooling management
© 2022 KEB Automation KG
517
ud53[1]
source select
Bit
Value
Plaintext
Notes
4
16
realtive to
OH
0:
The maximum difference between the selected temperatures and
the setpoint ud53[2] ref value is assigned to input Xd of the PI con-
troller
16:
OH temperature - ud53[2] ref value is the set value of the respective
heat sink temperature. The largest difference between setpoint and
actual value is assigned to input Xd of the PI controller
5
32
manual set-
ting
1:
The PWM control setting is preset manually
The display of ud53[5] and ud53[11] also displays the manually pre-
set value.
ud53[2]
ref value
Value
Meaning
0…100 °C
Set temperature or distance to OH threshold
11.3.1.2 Motor cooling
21
1fghfh
1
Figure 141: Overview controller motor cooling
ud55[1]
source select
Bit
Value
Plaintext
Notes
0
1
activate
Activation of the controller
5
32
manual setting
1
:
The PWM control setting is preset manually
The display of ud55[5] and ud55[11] also displays the manually preset
value.
ud55[2]
ref value
Value
Meaning
0 .. 100 °C
Set temperature of the motor

KEB COMBIVERT F6 Specifications

General

Brand	KEB
Model	COMBIVERT F6
Category	Controller
Language	English