10.2.2.3 Operator config data
An operator connected to the device via the diagnostic interface requires (for optimal op-
eration) information about the characteristics of the diagnostic interface and the object
directory.
These are provided via the structure de10 "Operator config data“.
Contains the index and subindex of the object which
is displayed by the operator after the start.
List of supported baud rates
Address of the object to change the baud rate.
Address of the object of the software version.
Address of the object of the software date.
List of supported DIN66019 services (31-0)
List of supported DIN66019 services (63-32)
Address of the object of the watchdog function.
Communication modes (see 0)
Format: 0xSSSSIIII (highword = subindex, lowword = index)
Bit 0: Baud rate index 0 (1200 bit/s)
Bit 1: Baud rate index 1 (2400 bit/s)
Bit 2: Baud rate index 2 (4800 bit/s)
Bit 3: Baud rate index 3 (9600 bit/s)
Bit 4: Baud rate index 4 (19200 bit/s)
Bit 5: Baud rate index 5 (38400 bit/s)
Bit 6: Baud rate index 6 (55500 bit/s)
Bit 7: Baud rate index 7 (57600 bit/s)
Bit 8: Baud rate index 8 (100000 bit/s)
Bit 9: Baud rate index 9 (115200 bit/s)
Bit 10: Baud rate index 10 (125000 bit/s)
Bit 11: Baud rate index 11 (250000 bit/s)
Bit 12: Baud rate index 12 (500000 bit/s)
0x00000A20
(Bit 5, 9 and 11)
Format: 0xIIII (index, subindex always 0, only VAR objects)
Format: 0xSSSSIIII (highword = subindex, lowword = index)
Format: 0xSSSSIIII (highword = subindex, lowword = index)
supported services (31-0)
Bit 31 = service 31 …… Bit 0 = service 0
supported services (63-31)
Bit 63 = service 63 …… Bit 32 = service 32
To Next Page
Loading...
Need help?
General
