Crane operation
11.7 Heating and air-conditioning system
11 - 140 3 112 993 en Operating manual GMK 6400
12.07.2013
Switching off This section only describes how to switch off the heater manually. If the
auxiliary heater was switched on automatically, it will be switched off after
a particular heating period. You can set this heating period;
à Setting the
heating period
, p. 11 - 139.
• To switch off, press the button (1) once. The auxiliary heater is switched
off immediately
H
If you turn off the ignition while the auxiliary heater is in operation, the
auxiliary heater continues to run for a certain period of time. You can set
this remaining time;
à Setting the remaining time, p. 11 - 140.
Setting the
remaining time
If the ignition is turned off while the auxiliary heater is running, the heating
system will continue to run for the remaining run time.
• Switch on the heater using the (1) button
• Turn off the ignition
The heater continues to run and the remaining run time set last flashes,
e.g. 48 minutes.
s t
• Set the desired remaining time on the flashing display. You can set
a remaining time of 1 to 120 minutes
• Wait for 5 seconds until the current time is shown.
The remaining time is now set
To Next Page
Loading...
Need help?
General
