3 Features C
Features 3-23
Operation References DPT Features, SLT Features;
—User Manual Call Forwarding — All Calls
Call Forwarding – Busy
Description A call directed to your extension is forwarded to another extension
if your telephone is busy.
Conditions • Types of calls which are forwarded by this feature are:
Outside calls – DIL 1:1; Intercept Routing
Intercom calls – Extension; Transfer
• There can only be one stage of Call Forwarding, if a call is forwarded to
a station which is also in Call Forwarding. In this case, Station Hunting
is activated for the forwarded call.
• Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
• If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
• Setting this function cancels other Call Forwarding or Do Not Disturb
functions, if any.
• A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming,
[005] Flexible Button Assignment
[100] Flexible Numbering, Call forwarding / Do not disturb set / cancel
Station Programming.......................................................User Manual,
Flexible Button Assignment – FWD/DND Button
Feature References None
Operation References DPT Features, SLT Features;
—User Manual Call Forwarding — Busy
To Next Page
Loading...
Need help?
General
