3 Features H
Features 3-71
Conditions • To enable Host PBX Access, put the host PBX line in a CO line group.
The user accesses the host PBX by selecting that CO line.
• A Host PBX Access Code is required to access CO lines of the host
PBX.
• A pause, if programmed, can be inserted between the user-dialled Host
PBX Access Code and the following digits (Automatic Pause
Insertion). Program the pause time required by the Host PBX for that
CO line group.
• Access to the host PBX during a conversation is also possible (External
Feature Access).
Programming References
Section 4, System Programming,
[411] Host PBX Access Codes
[412] Pause Time
Feature References Section 3, Features,
External Feature Access Pause Insertion, Automatic
Operation References Not applicable.
HOTEL APPLICATION
Description Allows the operator to handle the front/operator services such as
check-in / check-out, timed reminder (wake-up call).
This operation
is applicable to only the operator extension with a KX-T7235.
Check-In / Check-Out
Description Allows the operator to operate the check-in / check-out service.
This feature can control the usage of an outside call by switching
the Class of Service between primary and secondary, and count
and print out the telephone charge and the other charges (such as
mini-bar charges).
Conditions • Hotel application must be enabled by System Programming.
• When the check-in is assigned, the Class of Service is set to the
primary one and the charge counter will be cleared. When the check-
out is assigned, the Class of Service is set to secondary one and the
total telephone charge and the other charge will be displayed and
printed out.
• The telephone charge can be added to the surcharge according to the
pre-assigned margin rate.
To Next Page
Loading...
Need help?
General
