3 Features S
Features 3-109
• If Register Recall signal is manually sent out during a conversation, the
call record is printed and a new record is started.
Connection References
Section 2, Installation,
2.3.8 Printer Connection
Programming References
Section 4, System Programming,
[000] Date and Time Set
[212] Call Duration Count Start Time
[800] SMDR Incoming / Outgoing Call Log Printout
[801] SMDR Format
[802] System Data Printout
[806]–[807] EIA (RS-232C) Parameters — Port 1 / Port 2
Feature References None
Operation References Not applicable.
Station Programming
Description Allows the digital proprietary telephone (DPT) user to customize
the extension to their needs. The following are the programming
items available:
For DPT (KX-T7220; KX-T7230; KX-T7235; KX-T7250)
Call Waiting Tone Type Assignment
Flexible Button Assignment
Full One-Touch Dialing Assignment
Intercom Alerting Assignment
Preferred Line Assignment – Incoming / Outgoing
Station Programming Data Default Set
Handset / Headset Selection
Ringing Tone Selection for CO Buttons
For display DPT (KX-T7230; KX-T7235) only,
Charge Fee Reference (pre-assigned extensions only)
Self-Extension Number Confirmation
For large display DPT (KX-T7235) only,
Station Speed Dialing Number / Name Assignment
For operator extension DPT only,
CO Incoming Call Information Log Lock Clear
Remote Station Lock Control
To Next Page
Loading...
Need help?
General
