H 3 Features
3-70 Features
Feature References Section 3, Features,
Full One-Touch Dialing
Operation References DPT Features,
—User Manual Handsfree Operation
Hold Recall
Description Prevents a call on hold from being kept waiting longer than a pre-
determined time. If the timer expires, ringing or an alarm tone is
generated as a reminder to the user who held the call. If the user is
on-hook and its speaker-phone is off, the phone is rung. If the user
is off-hook or in speakerphone mode when the timer expires an
alarm tone is sent from the built-in speaker of a digital proprietary
telephone (DPT) or from the handset receiver of a single line
telephone at 15-second intervals.
Conditions • Hold Recall can be disabled by programming.
• The display PT flashes the indication of the held party for five seconds
at 15-second intervals synchronized with the tone.
• Alarm tone is sent as follows:
Programming References
Section 4, System Programming,
[200] Hold Recall Time
Feature References Section 3, Features,
Call Hold – CO Line Call Hold, Exclusive – CO Line
Call Hold – Intercom Call Hold, Exclusive – Intercom
Operation References Not applicable.
Host PBX Access
Description The system may be installed behind an existing host PBX. This is
performed by connecting a line from the host to a CO line in the
Digital Super Hybrid System.
15 s
To Next Page
Loading...
Need help?
General
