4.8 Extension Programming
Class of Service
601
System Programming 4-115
Description Programs each extension for a Class of Service (COS). The COS
determines the call handling abilities of each extension. For
Check-In Check-Out feature, a primary and secondary COS
number can be assigned per extension.
Selection • Jack number: KX-TD816 – 01 through 16, (-1 / -2),
KX-TD1232 – 01 through 64, (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• COS number: 1 through 8
Default All jacks-1/2 – Primary, Secondary – COS 1, COS 1
Programming 1. Enter 601.
Display: COS Assign
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #01-1:COS1, COS1
4. Enter a primary COS number.
To change the current entry, enter the new number.
5. Press .
6. Enter a secondary COS number.
To change the current entry, enter the new number.
7. Press STORE.
8. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
9. Repeat steps 4 through 8.
10. Press END.
To Next Page
Loading...
Need help?
General
