4.2 Manager Programming
Budget Management
009
System Programming 4-31
Description Assigns the charge limitation of a call on an extension basis.
Selection • Jack number:KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
( =all jacks, –1= first part, –2= second part)
• Charge limitation (Pulse) : 0 through 59999
Default All jacks – 0 Pulse
Programming 1. Enter 009.
Display:Charge Limit
2. Press NEXT.
Display:Jack NO?—>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01—1: 0
4. Enter a charge limitation.
To delete the charge limitation, press CLEAR.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Press END.
Conditions • If the charge limitation is set to “0,” no restriction is applied.
• To assign all jack numbers to one selection, press the key at step 3.
In this case, the display shows the contents programmed for Jack 01.
Feature References Section 3, Features,
Budget Management
To Next Page
Loading...
Need help?
General
