4.4 Timer Programming
Automatic Redial Interval Time
210
4-66 System Programming
Description Sets the interval time between Automatic Redial attempts.
Selection Time (seconds): 3 through 120 (✕10 is the actual time)
Default 12 (120 s)
Programming 1. Enter 210.
Display: Interval Time
2. Press NEXT.
Display example: Time: 120 sec
3. Enter the time.
To change the current entry, press CLEAR and the new time.
4. Press STORE.
5. Press END.
Conditions • You enter a number from 3 through 120. The actual time is 10 times
your input.
• Program [209] “Automatic Redial Repeat Times” is used to set the
number of times Automatic Redial is tried.
• You cannot leave the entry empty.
Feature References Section 3, Features,
Redial, Automatic
To Next Page
Loading...
Need help?
General
