4.5 TRS/ARS Programming
TRS Denied Code Entry for Levels 2 through 6
System Programming 4-71
301-305
Description These allow you to specify the numbers which are toll-restricted for
each toll restriction level as follows:
Program [301]: restricts levels 2 through 6
Program [302]: restricts levels 3 through 6
Program [303]: restricts levels 4 through 6
Program [304]: restricts levels 5 through 6
Program [305]: restricts level 6
Selection
• Location number: 01 through 20
• Toll call number: 7 digits (max.)
Default All locations – Not stored
Programming 1. Enter a program address (301 through 305).
Display example: TRS Deny LVL–2
2. Press NEXT.
Display: Location NO?–>
3. Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:Not Stored
4. Enter a toll call number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • There is a maximum of 20 toll call numbers which can be restricted for
each program. Each number has a maximum of seven digits, consisting
of 0 through 9, and . The character “ ” can be used as a wild card
character.
• Programs [306]–[310] “TRS Excepted Code Entry for Levels 2 through
6” are used to assign exceptions to these numbers. Programs
[500]–[501] “Toll Restriction Level — Day / Night” are used to set the
toll restriction value for each COS.
Feature References Section 3, Features,
Toll Restriction
To Next Page
Loading...
Need help?
General
